LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2008 >> Quest Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - DTCS P1211 Through P2A03 >> DTC P2135 TP Sensor >> CONSULT-III Reference Value in Data Monitor Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

CONSULT-III Reference Value in Data Monitor Mode

Specification data are reference values.

CONNECTOR TERMINAL SPECIFICATION DATA REFERENCE VALUES

MONITOR ITEM CONDITION SPECIFICATION
THRTL SEN 1
THRTL SEN 2(1)
  • Ignition switch: ON (Engine stopped)
  • Shift lever: D
 Accelerator pedal: Fully released More than 0.36V
Accelerator pedal: Fully depressed Less than 4.75V
(1) Throttle position sensor 2 signal is converted by ECM internally. Thus, it differs from ECM terminal voltage signal.
scientia non olet · About LEMON Manuals