LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2008 >> Sentra SE-R >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - DTCS P0137 To P0445 (Qr25DE) >> DTC P0442 EVAP Control System >> DTC Confirmation Procedure >> With Consult-III
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With Consult-III

  1. Turn ignition switch ON.
  2. Turn ignition switch OFF and wait at least 10 seconds.
  3. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-III.
  4. Check the following conditions are met.

    COOLAN TEMP/S: 0 - 100°C (32 - 212°F) 

    INT/A TEMP SE: 0 - 60°C (32 - 140°F) 

  5. Select "EVAP SML LEAK P0442/P1442" of "EVAPORATIVE SYSTEM" in "DTC WORK SUPPORT" mode with CONSULT-III.

    Follow the instruction displayed.

    NOTE: If the engine speed cannot be maintained within the range displayed on the CONSULT-III screen, go to "BASIC INSPECTION ".
  6. Make sure that "OK" is displayed.

    If "NG" is displayed, refer to "DIAGNOSTIC PROCEDURE ".

scientia non olet · About LEMON Manuals