ECM RE-COMMUNICATING FUNCTION: Special Repair Requirement

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

PERFORM ECM RE-COMMUNICATING FUNCTION
1. Install ECM.
2. Using a registered key (*2), turn ignition switch to "ON".
  *2: To perform this step, use the key that has been used before performing ECM replacement.
3. Maintain ignition switch in "ON" position for at least 5 seconds.
4. Turn ignition switch to "OFF".
5. Start engine.
Can engine be started?

YES: Procedure is completed.

NO: Initialize control unit. Refer to CONSULT Operation Manual.