LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2008 >> Sentra SE-R >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension System >> Preparation >> Special Service Tools
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Special Service Tools

The actual shapes of Kent-Moore tools may differ from those of special tools illustrated here.

SPECIAL SERVICE TOOLS REFERENCE

Tool number
(Kent-Moore No.)
Tool name		 Description
KV991040S0
( - )
CCK gauge attachment
  1. Plate
  2. Guide bolt
  3. Nut
  4. Spring
  5. Center plate
  6. KV99104020 Adapter A

    a: 72 mm (2.83 in) dia.

  7. KV99104030 Adapter B

    b: 65 mm (2.56 in) dia.

  8. KV99104040 Adapter C

    c: 57 mm (2.24 in) dia.

  9. KV99104050 Adapter D

    d: 53.4 mm (2.102 in) dia.
G04876517Courtesy of NISSAN MOTOR CO., U.S.A.
 Measuring wheel alignment
ST35652000
( - )
Strut attachment
G04876518Courtesy of NISSAN MOTOR CO., U.S.A.
 Disassembling and assembling strut
ST3127S000
(J-25742-1)
Preload Gauge
  1. GG91030000

    (J-25765)

    Torque wrench

  2. HT62940000

    ( - )

    Socket adapter (1/2")

  3. HT62900000

    ( - )

    Socket adapter (3/8")
G04876269Courtesy of NISSAN MOTOR CO., U.S.A.
 Measuring rotating torque of ball joint
HT72520000
(J-25730-A)
Ball joint remover
G04902049Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing tie-rod outer end and lower ball joint
KV101J0010
(J-47242)
Engine support table
G04885913Courtesy of NISSAN MOTOR CO., U.S.A.
 Front suspension member removal
scientia non olet · About LEMON Manuals