Wheel Alignment (Unladen*)
WHEEL ALIGNMENT SPECIFICATIONS
| Engine | MR20DE | QR25DE | |||
|---|---|---|---|---|---|
| Model | 2.0, 2.0 S, 2.0 SL | SE-R | SE-R SPEC-V | ||
| Camber Degree minute (Decimal degree) |
Minimum | -0° 55' (-0.92°) | -0° 55' (-0.92°) | -1° 00' (-1.00°) | |
| Nominal | -0° 10' (-0.17°) | -0° 10' (-0.17°) | -0° 15' (-0.25°) | ||
| Maximum | 0° 35' (0.58°) | 0° 35' (0.58°) | 0° 30' (0.50°) | ||
| Left and right difference (RH - LH) | 0° 45' (0.75°) or less | 0° 45' (0.75°) or less | 0° 45' (0.75°) or less | ||
| Caster Degree minute (Decimal degree) |
Minimum | 4° 10' (4.17°) | 4° 15' (4.25°) | 4° 25' (4.42°) | |
| Nominal | 4° 55' (4.92°) | 5° 00' (5.00°) | 5° 10' (4.17°) | ||
| Maximum | 5° 40' (5.67°) | 5° 45' (5.75°) | 5° 55' (5.92°) | ||
| Left and right difference (RH - LH) | 0° 45' (0.75°) or less | 0° 45' (0.75°) or less | 0° 45' (0.75°) or less | ||
| Kingpin inclination Degree minute (Decimal degree) |
11° 05' (11.08°) | 11° 05' (11.08°) | 11° 20' (11.33°) | ||
| Total toe-in | Distance (A - B) | Minimum | -1 mm (-0.04 in) | -1 mm (-0.04 in) | -1 mm (-0.04 in) |
| Nominal | 0 mm (0.00 in) | 0 mm (0.00 in) | 0 mm (0.00 in) | ||
| Maximum | 1 mm (0.04 in) | 1 mm (0.04 in) | 1 mm (0.04 in) | ||
| Angle (left or right, each side) Degree minute (Degree) |
Minimum | -0° 02' (-0.03°) | -0° 02' (-0.03°) | -0° 02' (-0.03°) | |
| Nominal | 0° 00' (0.00°) | 0° 00' (0.00°) | 0° 00' (0.00°) | ||
| Maximum | 0° 02' (0.03°) | 0° 02' (0.03°) | 0° 02' (0.03°) | ||
| *: Fuel, engine coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions. | |||||