LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2008 >> Sentra SE-R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transmission (CVT) >> DTC U1010 Transmission Control Module (Can) >> Diagnostic Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Procedure

  1. CHECK DTC 

    With CONSULT-III 

    1. Turn ignition switch ON.
    2. Select "SELF-DIAG RESULTS" mode for "TRANSMISSION" with CONSULT-III.
    3. Touch "ERASE".
    4. Turn ignition switch OFF and wait for at least 10 seconds.
    5. Perform "DTC confirmation procedure". Refer to "DTC CONFIRMATION PROCEDURE ".

    Is any malfunction of the "U1010 CONTROL UNIT(CAN)" indicated? 

    YES: Replace the TCM. Refer to "REMOVAL AND INSTALLATION ".

    NO: INSPECTION END 

scientia non olet · About LEMON Manuals