LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2009 >> Cube Base >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System >> Power Distribution System >> DTC/Circuit Diagnosis >> Push-Button Ignition Switch >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

  1. CHECK FUNCTION
    1. Select "PUSH SW" in "Data Monitor" mode with CONSULT-III.
    2. Check the push-button ignition switch signal under the following conditions.
    CONDITION CHART

    Test item Condition Status
    PUSH SW Push-button ignition switch is pressed ON
    Push-button ignition switch is not pressed OFF

    Is the indication normal? 

    YES: INSPECTION END.

    NO: Go to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals