Diagnosis Procedure

1. PERFORM WORK SUPPORT

   Perform "INSIDE ANT DIAGNOSIS" on Work Support of "INTELLIGENT KEY".

   Refer to "INTELLIGENT KEY : CONSULT-III FUNCTION (BCM - INTELLIGENT KEY) ".

   GO TO 2.

2. PERFORM SELF-DIAGNOSIS RESULT

   Perform Self-Diagnosis Result of "BCM".

   Is DTC detected? 

   YES: Refer to "DTC LOGIC " (instrument center) or "DTC LOGIC " (luggage room).

   NO: GO TO 3.

3. CHECK PUSH-BUTTON IGNITION SWITCH

   Check push-button ignition switch.

   Refer to "COMPONENT FUNCTION CHECK ".

   Is the operation normal? 

   YES: GO TO 4.

   NO: Repair or replace malfunctioning parts.

4. CONFIRM THE OPERATION

Confirm the operation again.

Is the inspection normal? 

YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".

NO: GO TO  1.