LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2009 >> Cube Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction >> System Description >> On Board Diagnostic (OBD) System >> Diagnosis Tool Function >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

  1. Turn ignition switch OFF.
  2. Connect "GST" to data link connector (1), which is located under LH dash panel.
  3. Turn ignition switch ON.
    4. Fig 1: Connecting GST To Data Link Connector
    G05914556Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Enter the program according to instruction on the screen or in the operation manual.

    (*: Regarding GST screens in this article, sample screens are shown.)

    Fig 2: CONSULT-II Display - GST Screens
    G04874897Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Perform each diagnostic mode according to each service procedure.

    For further information, see the GST Operation Manual of the tool maker. 

    Fig 3: CONSULT-II Display - Readiness Test
    G04874898Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals