Ignition Timing

Any of following two methods may be used.

1. Slide the harness protector off ignition coil No. 1 to clear the wires.
2. Attach timing light to the ignition coil No. 1 wires as shown in the figure.
   Fig 1: Attaching Timing Light To Ignition Coil No. 1 Wires

   Courtesy of NISSAN MOTOR CO., U.S.A.
3. Check ignition timing.

   A: Timing indicator

Fig 2: Identifying Timing Indicator

Courtesy of NISSAN MOTOR CO., U.S.A.