Inspection Procedure

Turn ignition switch OFF.
Connect GST to data link connector (1).
- Accelerator pedal (2)
  
  Fig 1: Identifying Accelerator Pedal And Data Link Connector
  Courtesy of NISSAN MOTOR CO., U.S.A.
Turn ignition switch ON.
Enter the program according to instruction on the screen or in the operation manual.
(*: Regarding GST screens in this part, sample screens are shown.)

Fig 2: Generic Scan Tool Screen Display
Courtesy of NISSAN MOTOR CO., U.S.A.
Perform each diagnostic service according to each service procedure.
For further information, see the GST Operation Manual of the tool maker .

Fig 3: Generic Scan Tool Display - READINESS TESTS
Courtesy of NISSAN MOTOR CO., U.S.A.