Consult-III TCM Reprogramming Procedure (NTB09-052)
WARNING: This page is about the Sentra Base, Automatic CVT, which is a different variant/trim than selected.
Publication date: 2009-06-30Reference number: NTB09-052
CONSULT-III TCM REPROGRAMMING PROCEDURE
TECHNICAL SERVICE BULLETIN
Reference Number(s): NTB09-052, Date of Issue:
June 30, 2009
| NISSAN: | 2007-2009 Altima, Maxima, Sentra, Versa; 2008-2009 Rogue; 2009 Murano |
| CLASSIFICATION: | AT09-004 |
| APPLIED VEHICLES: | 2007-2009 Altima Sedan and Coupe (L32, CL32); 2007-2009 Maxima (A34, A35); 2009 Murano (Z51); 2008-2009 Rogue (S35); 2007-2009 Sentra (B16); 2007-2009 Versa (C11) |
SERVICE INFORMATION
A complete step-by-step General Procedure for C-III TCM Reprogramming is now available by hyperlink on the Nissan Techinfo web site.
This General Procedure is also available via hyperlink from specific C-III symptom-based Technical Service Bulletins in ASIST.
CAUTION:
BEFORE STARTING REPROGRAMMING
- Connect a battery charger to the vehicle battery.
If the 12V battery voltage drops during reprogramming, the TCM may be damaged.
- Be sure to turn OFF all vehicle electrical loads.
- If a vehicle electrical load remains ON, the TCM may be damaged.
- For TCM reprogramming, the C-III MUST be connected to the VI using the USB cable.
- Be sure to connect the AC Adapter.
If the C-III battery voltage drops during reprogramming, the process will be interrupted and the TCM will be damaged.