Preliminary Inspection
WARNING:
Always adjust the alignment with the vehicle on a flat surface.
NOTE:
If alignment is out of specification, inspect and replace any damaged or worn rear suspension parts before making any adjustments.
- Check and adjust the wheel alignment with the vehicle under unladen conditions. "Unladen conditions" means that the fuel, coolant, and lubricant are full; and that the spare tire, jack, hand tools and mats are in their designated positions.
- Check the tires for incorrect air pressure and excessive wear.
- Check the wheels for run out and damage. Refer to "INSPECTION ".
- Check the wheel bearing axial end play. Refer to "ON-VEHICLE INSPECTION AND SERVICE ".
- Check the shock absorbers for leaks or damage.
- Check each mounting point of the suspension components for any excessive looseness or damage.
- Check each link, arm, and the suspension member for any damage.
- Check the vehicle height. Refer to "WHEELARCH HEIGHT (UNLADEN*) ".