Setting The Vehicle Security System

Initial Condition

• Ignition switch is in OFF position.

Disarmed Phase

• When any door is open, the vehicle security system is set in the disarmed phase on the assumption that the owner is inside or near the vehicle.
• When the vehicle security system is in the disarmed phase, the security indicator lamp blinks every 2.4 seconds.

Pre-armed Phase and Armed Phase

When the following operation 1 or 2 is performed, the vehicle security system turns into the "pre-armed" phase. (Security indicator lamp illuminates.)

1. BCM receives LOCK signal from door key cylinder switch, door lock and unlock switch or keyfob, after all doors are closed.
2. All doors are closed after all doors are locked by ignition key or door lock and unlock switch.