Work Procedure

CHECK ANTI-PINCH FUNCTION
1. Fully open the door window.
2. Place a piece of wood near fully closed position.
3. Close door glass completely with AUTO-UP.
4. Check the following conditions.
  - Check that glass lowers for approximately 150 mm (5.9 in) without pinching piece of wood and stops.
  - Check that glass does not rise not when operating the power window main switch or front power window switch (passenger side) while lowering.
    CAUTION:
    Perform initial setting when AUTO-UP operation or anti-pinch function does not operate normally.
    
    Check that AUTO-UP operates before inspection when system initialization is performed.
    
    Do not check with hands and other body parts because they may be pinched. Do not get pinched.
    END