Component Inspection (FPCM)

CHECK FUEL PUMP

Check the voltage between FPCM terminals under the following condition.

TERMINAL VOLTAGE REFERENCE CHART

FPCM			Condition	Voltage (Approx.)
Connector	+	-
Connector	Terminal
B41	7	6	For 1 second after turning ignition switch ON	8.5 V
			More than 1 second after turning ignition switch ON	0 V
			Idle speed	8.5 V

Is the inspection result normal?

YES: INSPECTION END

NO: Replace FPCM. Refer to "REMOVAL AND INSTALLATION ".