CAN Communication System Inspection

With CONSULT-III 

• Connect CONSULT-III, and turn ignition switch ON.
• Touch "INTELLIGENT KEY" on "SELECT SYSTEM" screen.
• Touch "SELF-DIAG RESULTS" on "SELECT DIAG MODE" screen.
• Check display content in self-diagnostic results.
  CONSULT-III DESCRIPTION
  
  

  CONSULT-III display item	DTC code
  NO DTC IS DETECTED	-
  CAN COMM	U1000
  CAN COMM2	U1010

  OK or NG 

  NO DTC IS DETECTED: INSPECTION END

  CAN COMM [U1000]: Go to "CAN SYSTEM", Refer to "TROUBLE DIAGNOSIS FLOW CHART ". CAN COMM2 [U1010]: Replace Intelligent Key unit. Refer to "REMOVAL AND INSTALLATION OF INTELLIGENT KEY UNIT ".