CONSULT-III Function (BCM): Notes
CONSULT-III can display each diagnostic item using the diagnostic test modes shown following.
CONSULT-III FUNCTION
| Diagnostic mode | Description |
|---|---|
| WORK SUPPORT | Supports inspections and adjustments. Commands are transmitted to the BCM for setting the status suitable for required operation, input/output signals are received from the BCM and received date is displayed. |
| DATA MONITOR | Displays BCM input/output data in real time. |
| ACTIVE TEST | Operation of electrical loads can be checked by sending drive signal to them. |
| SELF DIAGNOSTIC RESULT | Displays BCM self-diagnosis results. |
| CAN DIAG SUPPORT MNTR | The result of transmit/receive diagnosis of CAN communication can be read. |
| ECU IDENTIFICATION | BCM part number can be read. |
| CONFIGURATION | Performs BCM configuration read/write functions. |