Combination Meter

Removal

1. Remove steering lock escutcheon (1), remove steering column cover screws (A) and remove steering column cover upper and steering column cover lower (2).
   Fig 1: Identifying Steering Lock Escutcheon, Steering Column Cover Lower & Steering Column Cover Screws

   Courtesy of NISSAN MOTOR CO., U.S.A.
2. Disengage the metal clips, and then remove cluster lid A.
3. Remove the combination meter screws (A), pull out the combination meter (1) to disconnect the connector, remove the combination meter (1).
   Fig 2: Identifying Combination Meter Screws & Combination Meter

   Courtesy of NISSAN MOTOR CO., U.S.A.

Installation

Installation is in the reverse order of removal.