LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2011 >> Sentra SE-R >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P1148 To P2A03 (Qr25DE) >> DTC P2138 App Sensor >> CONSULT-III Reference Value in Data Monitor Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

CONSULT-III Reference Value in Data Monitor Mode

Specification data are reference values.

MONITOR ITEM CONDITION CHART

Monitor item Condition Specification
ACCEL SEN 1
  • Ignition switch: ON (Engine stopped)
 Accelerator pedal: Fully released 0.6 - 0.9 V
Accelerator pedal: Fully depressed 4.0 - 4.8 V
ACCEL SEN 2(1)
  • Ignition switch: ON (Engine stopped)
 Accelerator pedal: Fully released 0.6 - 0.9 V
Accelerator pedal: Fully depressed 3.9 - 4.8 V
CLSD THL POS
  • Ignition switch: ON (Engine stopped)
 Accelerator pedal: Fully released ON
Accelerator pedal: Slightly depressed OFF
(1) Accelerator pedal position sensor 2 signal is converted by ECM internally. Thus, it differs from ECM terminal voltage.
scientia non olet · About LEMON Manuals