On Board Diagnostic (OBD) System: Introduction
The ECM has an on board diagnostic system, which detects malfunctions related to engine sensors or actuators. The ECM also records various emission-related diagnostic information including:
DIAGNOSTIC CHART
| Emission-related diagnostic information | Diagnostic service | ||
|---|---|---|---|
| Diagnostic Trouble Code (DTC) | Service $03 of SAE J1979/ISO 15031-5 | ||
| Freeze Frame data | Service $02 of SAE J1979/ISO 15031-5 | ||
| System Readiness Test (SRT) code | Service $01 of SAE J1979/ISO 15031-5 | ||
| 1st trip Diagnostic Trouble Code (1st Trip DTC) | Service $07 of SAE J1979/ISO 15031-5 | ||
| 1st trip Freeze Frame data | - | ||
| Test values and Test limits | Service $06 of SAE J1979/ISO 15031-5 | ||
| Calibration ID | Service $09 of SAE J1979/ISO 15031-5 | ||
| Permanent Diagnostic Trouble Code (Permanent DTC) | Service $0A(1) of SAE J1979/ISO 15031-5 | ||
|
|||
The above information can be checked using procedures listed in the table below.
TWO TRIP DETECTION LOGIC REFERENCE
| x: Applicable -: Not applicable | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| DTC | 1st trip DTC | Freeze Frame data | 1st trip Freeze Frame data | SRT code | SRT status | Test value | Permanent DTC status | |||
| CONSULT-III | x | x | x | x | x | x | - | x | ||
| GST | x | x | x | - | x | x | x | x | ||
| ECM | x | x(1) | - | - | - | x | - | - | ||
|
||||||||||
The malfunction indicator lamp (MIL) on the instrument panel lights up when the same malfunction is detected in two consecutive trips (Two trip detection logic), or when the ECM enters fail-safe mode.
(Refer to "FAIL-SAFE CHART ".)