Diagnostic Procedure
- PERFORM SELF-DIAGNOSIS
With CONSULT-III
- Turn ignition switch "ON". (Do not start engine.)
- Select "SELF-DIAG RESULTS" mode for "EPS" with CONSULT-III.
- Touch "ERASE".
- Turn ignition switch "OFF", and wait at least 10 seconds.
- Start engine.
- Perform the self-diagnosis again.
Is the "ANGLE SENSOR [C1605]" displayed?
YES: EPS motor rotor position sensor is malfunctioning. Replace steering column assembly. Refer to "REMOVAL AND INSTALLATION ".
NO: INSPECTION END