LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2011 >> Sentra SE-R >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Service Information >> Steering Column >> Removal and Installation >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Notes

CAUTION:
  • Any time the ignition switch has been removed or installed, the keys must be re-registered in the BCM. Refer to the CONSULT-III operation instructions IVIS/NVIS.
  • Steering column must be kept at maximum tilt up position during removal and installation. Do not operate tilt mechanism while steering column is out of the vehicle.
  • Put matching mark on intermediate shaft and steering column assembly before removing intermediate shaft.
  • When steering wheel is turned repeatedly with the vehicle stopped, care must be taken because EPS motor and EPS control unit may get too hot.
  • Steering column assembly is heavy. Care must be taken when removing steering column assembly from vehicle.
  • Do not put steering column assembly near the things that generate excessive magnetic force.
  • Steering column assembly cannot be disassembled.
scientia non olet · About LEMON Manuals