DTC Detection Logic

NOTE:

If DTC B261A is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
If DTC B261A is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "DTC LOGIC ".

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
B261A	PUSH-BTN IGN SW	BCM detects a difference of signal for 1 second or more between the following items. Push-button ignition switch signal Push-button ignition switch status signal (CAN)	Harness or connectors (Push-button ignition switch circuit is open or shorted.) BCM IPDM E/R