LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> Steering >> Power Steering >> Steering Control System >> Removal And Installation >> EPS Control Unit >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

CAUTION:
  • Disconnect battery negative terminal before starting operations.
  • Never shock EPS control unit, e.g. drop or hit.
  • Never get EPS control unit wet with water or other liquid. Also, do not give EPS control unit a radical temperature change to avoid getting water drops.
  • Never disassemble or remodel EPS control unit, EPS motor, torque sensor, harness and connectors.
  1. Remove instrument lower panel LH. Refer to "EXPLODED VIEW ".
  2. Remove knee protector.
  3. Disconnect EPS control unit connectors.
    CAUTION: Hold and pull the connector housing, not pulling harness, when disconnecting connectors. Also, do not grip, collapse or apply excessive force to the connector.
  4. Remove EPS control unit from steering column assembly.
scientia non olet · About LEMON Manuals