LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> Cube SL >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing (Except CALIFORNIA) >> ASCD Brake Switch >> Component Inspection (ASCD Clutch Switch)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection (ASCD Clutch Switch)

  1. CHECK ASCD CLUTCH SWITCH-I
    1. Turn ignition switch OFF.
    2. Disconnect ASCD clutch switch harness connector.
    3. Check the continuity between ASCD clutch switch terminals under the following conditions.
    Terminals Condition Continuity
    1 and 2 Clutch pedal Fully released Existed
    Slightly depressed Not existed

    Is the inspection result normal? 

    YES >> INSPECTION END

    NO >> GO TO 2.

  2. CHECK ASCD CLUTCH SWITCH-II
    1. Adjust ASCD clutch switch installation. Refer to "INSPECTION AND ADJUSTMENT ".
    2. Check the continuity between ASCD clutch switch terminals under the following conditions.
    Terminals Condition Continuity
    1 and 2 Clutch pedal Fully released Existed
    Slightly depressed Not existed

    Is the inspection result normal? 

    YES >> INSPECTION END

    NO >> Replace ASCD clutch switch. Refer to "EXPLODED VIEW ".

scientia non olet · About LEMON Manuals