Removal & Installation
WARNING: This page is about the Frontier S, 4D Pickup Extra Cab, Automatic Trans, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| In-Line4,Automatic Trans | 5.4 | C | ||
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 0.2 | C | |||
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| Rear | 0.4 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: FRONT PUMP &/OR SEAL: Remove & Replace: | ||||
| 0.4 | B | |||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Removal & Installation: | ||||
| 0.3 | C | |||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Remove, Install, and Overhaul: | ||||
| 2.8 | A | |||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Replace: | ||||
| 0.5 | C | |||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| RWD | 0.6 | C | ||
| Combination Procedure: TRANSMISSION OIL COOLER: Clean: | ||||
| 0.5 | C | |||