LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> Frontier SL, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing (VQ40DE) >> ASCD Brake Switch >> Component Inspection >> Stop Lamp Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Stop Lamp Switch

  1. Turn ignition switch OFF.
  2. Disconnect stop lamp switch harness connector.
  3. Check harness continuity between stop lamp switch terminals 1 and 2 under the following conditions.
    Condition Continuity
    When brake pedal: Fully released. Should not exist.
    When brake pedal: Slightly depressed. should exist.
    Fig 1: Checking Stop Lamp Switch
    G08134271Courtesy of NISSAN NORTH AMERICA, INC.

    If NG, adjust stop lamp switch installation, refer to "INSPECTION AND ADJUSTMENT ", and perform step  3 again.

scientia non olet · About LEMON Manuals