LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> Maxima S >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS U0101 To P0153 >> DTC P0102, P0103: MAF Sensor >> DTC Logic >> DTC Detection Logic
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0102 Mass air flow sensor circuit low input An excessively low voltage from the sensor is sent to ECM.
  • Harness or connectors (The sensor circuit is open or shorted.)
  • Intake air leakage
  • Mass air flow sensor
P0103 Mass air flow sensor circuit high input An excessively high voltage from the sensor is sent to ECM.
  • Harness or connectors (The sensor circuit is open or shorted.)
  • Mass air flow sensor


DTC No. Trouble diagnosis (Trouble diagnosis content) DTC detecting condition Possible cause
P0111 IAT SENSOR 1 B1 [Intake air temperature (IAT) sensor circuit range/performance] The comparison result of signals transmitted to ECM from each temperature sensor (IAT sensor, ECT sensor, and FTT sensor) shows that the voltage signal of the IAT sensor is higher/lower than that of other temperature sensors when the engine is started with its cold state.
  • Harness or connectors (High or low resistance in the IAT sensor circuit)
  • IAT sensor