EXHAUST VALVE TIMING CONTROL LEARNING: Special Repair Requirement

START
With CONSULT
1. Start engine and warm it up to normal operating temperature.
2. Set selector lever position to N and confirm that the following electrical or mechanical loads are not applied.
  - Headlamp switch is OFF
  - Air conditioner switch is OFF
  - Rear window defogger switch is OFF
  - Steering wheel is in the straight-ahead position, etc.
3. Keep the engine speed between 1, 800 and 2, 000 RPM.
4. Select "EXH V/T CONTROL LEARN" in "WORK SUPPORT" mode with CONSULT.
5. Touch "START" and wait 20 seconds.
6. Check that "CMPLT" is displayed on CONSULT screen.
  Learning completed: CMPLT
  
  Learning not yet: YET
Without CONSULT
1. Start engine and warm it up to normal operating temperature.
2. Set selector lever position to N and confirm that the following electrical or mechanical loads are not applied.
  - Headlamp switch is OFF
  - Air conditioner switch is OFF
  - Rear window defogger switch is OFF
  - Steering wheel is in the straight-ahead position, etc.
3. Keep the engine speed between 1, 800 and 2, 000 RPM at 20 seconds.
  : END