LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> Maxima S >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Control System - Component Testing >> Electronic Controlled Engine Mount >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

  1. CHECK OVERALL FUNCTION

    With CONSULT 

    1. Start engine and warm it up to normal operating temperature.
    2. Select "ENGINE MOUNTING" in "ACTIVE TEST" mode with CONSULT and touch "ON/OFF" on the CONSULT screen.
    3. Check that the motor operating sound is heard from front electronic controlled engine mount and rear electronic controlled engine mount for about 0.5 seconds according to the switching condition of "ENGINE MOUNTING".

    Without CONSULT 

    1. Make sure that gear position is P or N.
    2. Start engine and let it idle.
    3. Change the engine speed from idle to more than 1, 000 RPM and then return to idle (with vehicle stopped).
    4. Check that the motor operating sound is heard from front electronic controlled engine mount for and rear electronic controlled engine mount about 0.5 seconds when changing engine speed.

      It is better to hear the operating sound around the left side front wheel house.

      OK or NG 

      YES: INSPECTION END

      NO: "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals