| Leak detector i.e.: (J-41416) |
 Courtesy of NISSAN NORTH AMERICA, INC.
|
Locating the EVAP leak |
| EVAP service port adapter i.e.: (J-41413-OBD) |
 Courtesy of NISSAN NORTH AMERICA, INC.
|
Applying positive pressure through EVAP service port |
| Fuel filler cap adapter i.e.: (MLR-8382) |
 Courtesy of NISSAN NORTH AMERICA, INC.
|
Checking fuel tank vacuum relief valve opening pressure |
| Socket wrench |
 Courtesy of NISSAN NORTH AMERICA, INC.
|
Removing and installing engine coolant temperature sensor |
| Oxygen sensor thread cleaner i.e.: (J-43897-18) (J-43897-12) |
 Courtesy of NISSAN NORTH AMERICA, INC.
|
Reconditioning the exhaust system threads before installing a new oxygen sensor. Use with anti-seize lubricant shown below.
- : 18 mm diameter with pitch 1.5 mm for Zirconia Oxygen Sensor
- : 12 mm diameter with pitch 1.25 mm for Titania Oxygen Sensor
|
| Anti-seize lubricant i.e.: (Permatex™ 133AR or equivalent meeting MIL specification MIL-A-907) |
 Courtesy of NISSAN NORTH AMERICA, INC.
|
Lubricating oxygen sensor thread cleaning tool when reconditioning exhaust system threads. |