Keyfob Function (Lock) Check
NOTE:
The Signal Tech II tool (J-50190) can be used to test the remote keyless entry keyfob relative signal strength. Refer to the
Signal Tech II User Guide for additional information.
- CHECK KEYFOB FUNCTION
With CONSULT
Check keyfob function in "DATA MONITOR" mode with CONSULT. When pushing lock button of keyfob, the corresponding monitor item should be turned as follows.
Test item Condition KEYLESS LOCK Pushing LOCK button: ON Other than above: OFF OK or NG
OK: Keyfob is OK.
NG: Replace keyfob.