CAN Communication Inspection Using CONSULT (Self-Diagnosis)
- SELF-DIAGNOSTIC RESULT CHECK
- Connect CONSULT and select "BCM" on "SELECT SYSTEM" screen.
- Select "BCM" on "SELECT TEST ITEM" screen, and select "SELF-DIAG RESULTS".
- Check display content in self-diagnostic results.
CONSULT display code Diagnosis item U1000 INITIAL DIAG TRANSMIT DIAG ECM IPDM E/R METER/M&A I-KEY Contents displayed
No malfunction >> Inspection End.
Malfunction in CAN communication system >> After printing the monitor items. Refer to , "CONDITION OF ERROR DETECTION ".