CAN Communication System Inspection

With CONSULT 

• Connect CONSULT, and turn ignition switch ON.
• Touch "INTELLIGENT KEY" on "SELECT SYSTEM" screen.
• Touch "SELF-DIAG RESULTS" on "SELECT DIAG MODE" screen.
• Check display content in self-diagnostic results.

  CONSULT display item	DTC code
  NO DTC IS DETECTED	-
  CAN COMM	U1000
  CAN COMM2	U1010

  OK or NG 

  NO DTC IS DETECTED >> INSPECTION END

  CAN COMM [U1000]>> Go to "CAN SYSTEM", Refer to , "TROUBLE DIAGNOSIS FLOW CHART ".

  CAN COMM2 [U1010]>> Replace Intelligent Key unit. Refer to , "REMOVAL AND INSTALLATION OF INTELLIGENT KEY UNIT ".