Engine Start Condition Check
NOTE:
- Before performing the diagnosis in the following table, check "Trouble Diagnosis Procedure". Refer to , "TROUBLE DIAGNOSIS PROCEDURE ".
- If the following "symptoms" are detected, check systems shown below in the "Diagnoses/service procedure" column in this order.
| Symptom | Diagnosis/service procedure | Refer to |
|---|---|---|
| Engine start condition check | 1. CVT shift selector (park position switch) check. | CVT SHIFT SELECTOR (PARK POSITION SWITCH) CHECK |
| 2. Stop lamp switch check. | STOP LAMP SWITCH CHECK | |
| 3. Replace Intelligent Key unit. | INTELLIGENT KEY UNIT POWER SUPPLY AND GROUND CIRCUIT INSPECTION |