ACC Switch Check
- CHECK ACC SWITCH
With CONSULT
Check ACC switch ("ACC ON SW") in "DATA MONITOR" mode with CONSULT.
Monitor item Condition ACC ON SW Ignition switch position is ACC or ON : ON Ignition switch position is OFF : OFF Without CONSULT
Check voltage between BCM connector and ground.
Terminals Ignition switch condition Voltage (V) (Approx.) (+) (-) BCM connector Terminal M18 11 Ground ACC or ON Battery voltage OFF 0 OK or NG
OK: ACC switch is OK.
NG: Check the following.
- 10A fuse [No. 6, located in fuse block (J/B)]
- Harness for open or short between BCM and fuse.