Initialization Procedure
If the sunroof does not open or close automatically, use the following procedure to return sunroof operation to normal.
NOTE:
If the sunroof switch is released at any time during step 3, the procedure must be started over again. Leave the ignition switch ON for at least 2 seconds after this procedure.
- Turn the ignition switch to the ON position.
- Hold the sunroof switch in the tilt up position. Release the switch when the sunroof has reached the full tilt up position.
- Within 5 seconds of releasing the switch in step 2, hold the sunroof switch in the tilt up position again. The sunroof will move from the open position and back to the close position. Release the switch only when the sunroof has reached the full closed position.