Inspection Procedure

1. Turn ignition switch OFF.
2. Connect GST to data link connector (1).
   • Accelerator pedal (2)
   Fig 1: Identifying Accelerator Pedal And Data Link Connector

   Courtesy of NISSAN NORTH AMERICA, INC.
3. Turn ignition switch ON.
4. Enter the program according to instruction on the screen or in the operation manual.

   (*: Regarding GST screens in this section, sample screens are shown in the figure.)

   Fig 2: Display - GST Sample Screen

   Courtesy of NISSAN NORTH AMERICA, INC.
5. Perform each diagnostic service according to each service procedure.

For further information, see the GST Operation Manual of the tool maker  .

Fig 3: Display - Readiness Tests

Courtesy of NISSAN NORTH AMERICA, INC.