Maintenance Service Reminder Reset - Procedure 12
Service Interval Reminder Reset (if equipped):
Quickly push and release the trip computer change button (A - See Fig 1) on the instrument panel located near the speedometer during the "Oil Good" or "Oil Lo" mode to display an approximate oil level indication.
Adjust the interval distance to oil change by pushing the trip computer change button (A) for 3 seconds while the wrench symbol and distance to oil change are displayed. The symbol and distance display will start flashing and the display shows the current interval. Push the switch to increase the interval distance. Each step increases the interval distance by 500 mi (1, 000 km). The interval distance can be set up to 18, 000 mi (30, 000 km) after which the display returns to zero.
If no further action is made, the display returns to oil display status indication and the new interval is set. If the interval distance is set to 0, the display will skip the distance to oil change information and wrench symbol display mode and will directly display the oil display status ("Oil Good" or "Oil Lo"). In order to return to the distance to oil change information and wrench symbol display mode, push the trip computer change button for approximately 3 seconds after the ignition switch has been turned to the ON position, and adjust the distance to oil change schedule as previously described.