Removal and Installation: Removal
- Remove cowl top panel. Refer to REMOVAL AND INSTALLATION .
- Remove front wheel and tire assemblies using power tool.
- Remove harness of wheel sensor from strut assembly. Refer to
REMOVAL AND INSTALLATION
.CAUTION: Do not pull on wheel sensor harness.
- Remove brake hose lock plate. Refer to HYDRAULIC CIRCUIT .
- Remove the nut on the upper side of stabilizer connecting rod using power tool, and then remove stabilizer connecting rod from strut assembly.
- Remove nuts and bolts, and then remove steering knuckle from strut assembly. Refer to REMOVAL AND INSTALLATION .
- Remove the strut mounting insulator bolts, then remove strut assembly.