LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> Sentra SE-R >> Repair and Diagnosis >> Transmission >> Automatic Transmission (CVT) >> Service Information >> Shift Control System >> Adjustment of Transmission Range Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Adjustment of Transmission Range Switch

  1. Move shift selector to "N" position.
  2. Remove control cable from manual lever.
  3. Loosen transmission range switch bolts (A). Insert a 4mm pin into the adjusting holes (B) on both transmission range switch and manual lever for adjusting the position.
  4. Tighten transmission range switch bolts (A).

    Transmission range switch bolts (A): 5.9 N.m (0.60 kg-m, 52 in-lb) 

    Fig 1: Identifying Transmission Range Switch Bolts And Adjusting Holes
    G04927108Courtesy of NISSAN NORTH AMERICA, INC.
  5. Connect control cable on manual lever. Refer to "ADJUSTMENT OF CVT POSITION ".
scientia non olet · About LEMON Manuals