LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> Sentra SE-R >> Repair and Diagnosis >> Transmission >> Automatic Transmission (CVT) >> Service Information >> Shift Control System >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

CAUTION: Make sure that parking brake is applied before removal and installation.
  1. Place the shift selector in the "P" position.
  2. Remove the center console assembly. Refer to , "REMOVAL AND INSTALLATION ".
  3. Remove the instrument lower panel LH. Refer to , "REMOVAL AND INSTALLATION ".
  4. Remove steering lock escutcheon (1).
  5. Remove steering column cover screws (A), then remove steering column upper cover and lower cover (2).
    Fig 1: Identifying Steering Lock Escutcheon, Steering Column Cover And Screws
    G04928064Courtesy of NISSAN NORTH AMERICA, INC.
  6. Remove instrument lower covers (LH/RH). Refer to , "COMPONENT PARTS ".
  7. Remove the glove box assembly. Refer to , "REMOVAL AND INSTALLATION ".
  8. Remove the instrument lower cover (center) screws, disconnect power socket connector and then remove the instrument lower cover (center). Refer to , "COMPONENT PARTS ".
  9. Remove the instrument upper cover screws and then remove the instrument upper cover. Refer to , "COMPONENT PARTS ".
  10. Disconnect the CVT shift selector assembly harness connector.
  11. Remove the key interlock cable from the CVT shift selector assembly. Refer to "REMOVAL AND INSTALLATION ".
  12. Remove the control cable from the CVT shift selector assembly.
  13. Remove the nuts and the CVT shift selector assembly.
scientia non olet · About LEMON Manuals