Component Function Check

CHECK COOLING FAN FUNCTION
With CONSULT
1. Turn ignition switch ON.
2. Perform "COOLING FAN " in "ACTIVE TEST" mode with CONSULT.
3. Touch "LOW" and "Hi" on the CONSULT screen.
4. Check that cooling fan operates.
NOTE: The cooling fan operates at high speeds even when "LOW" is selected in CONSULT "ACTIVE TEST". (For single connector cooling fan without A/C models)

Without CONSULT
1. Perform IPDM E/R auto active test and check cooling fan motor operation. Refer to "DIAGNOSIS DESCRIPTION ".
2. Check that cooling fan operates.
  Is the inspection result normal?
  
  YES: INSPECTION END
  
  NO: Refer to "DIAGNOSIS PROCEDURE ".