Input Signal And Output Signal
Major signal transmission between each unit via communication lines is shown in the following table.
| Component |
Signal description |
| Yaw rate/side G sensor |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via communication line.
- Yaw rate signal
- Side G sensor signal
|
| Steering angle sensor |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.
- Steering angle sensor signal
|
| Combination meter |
Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication.
- VDC warning lamp signal
- ABS warning lamp signal
|