LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2013 >> Versa S Plus >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Introduction) >> System Description >> System >> Air Conditioning Cut Control >> AIR CONDITIONING CUT CONTROL: System Description >> Input/Output Signal Chart
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input/Output Signal Chart

Sensor Input signal to ECM ECM function Actuator
Crankshaft position sensor (POS) Camshaft position sensor (PHASE) Engine speed(1) Piston position A/C compressor request signal IPDM E/R
โ†“
Air conditioner relay
โ†“
Compressor
Engine coolant temperature sensor Engine coolant temperature
Accelerator pedal position sensor Accelerator pedal position
Battery Battery voltage(1)
Refrigerant pressure sensor Refrigerant pressure
EPS control unit EPS operation signal(2)
Combination meter Vehicle speed signal(2)
BCM A/C ON signal(2) Blower fan signal(2)
(1) ECM determines the start signal status by the signals of engine speed and battery voltage.
(2) This signal is sent to the ECM through CAN communication line.