| BATTERY VOLT |
Engine running |
Battery voltage (V) |
| STEERING ANGLE |
The steering wheel is not steered. |
Approx. 0.0 deg |
| The steering wheel is steered. |
Displays steering angle (deg) |
| STR ANG SPD |
The steering wheel is not steered. |
Approx. 0.0 deg/s |
| The steering wheel is steered. |
Displays steering angle speed (deg/s) |
| MOTOR CURRENT |
Engine running |
Steering wheel: Not steering (There is no steering force) |
MAX approx. 10 A |
| Steering wheel: Right or left turn |
Displays consumption current of power steering control module (A) |
| MTR REV SPD COMM |
Engine running |
Steering wheel: Not steering (There is no steering force) |
Shows an almost constant value (RPM) |
| Steering wheel: Right or left turn |
The value changes as a steering speed (RPM) |
| MTR REV SPD |
Engine running |
Steering wheel: Not steering (There is no steering force) |
Shows an almost constant value (RPM) |
| Steering wheel: Right or left turn |
The value changes as a steering speed (RPM) |
| C/U TEMP |
Engine running |
Displays temperature of inside of power steering control module (°C or °F) |
| C/U TEMP A |
Engine running |
Displays temperature of inside of power steering control module (°C or °F) |
| MTR ASSIST |
Engine running |
100% |
| ESTM VHCL SPD |
Vehicle stopped |
0.00 km/h or mph |
| While driving |
Approximately equal to the indication on speedometer (inside of ±10%) |
| WARNING LAMP |
Hydraulic pump electric power steering warning lamp: ON |
On |
| Hydraulic pump electric power steering warning lamp: OFF |
Off |
| ENGINE STATUS |
Engine not running |
STOP |
| Engine running |
RUN |
| Engine cranking |
CRANK |
| VHCL SPD JUDGE |
Vehicle speed signal can be received via CAN communication |
OK |
| Vehicle speed signal cannot be received via CAN communication |
NG |