Component Description

Component		Reference/Function
ABS actuator and electric unit (control unit)	Motor/accumulator assembly	"ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) "
	Motor relay
	Actuator relay (main relay)
	ABS IN valve
	ABS OUT valve
	Cut valve 1
	Cut valve 2
	Suction valve 1
	Suction valve 2
	Accumulator pressure sensor
	Master cylinder pressure sensor
Wheel sensor		"WHEEL SENSOR AND SENSOR ROTOR "
Stop lamp switch		"STOP LAMP SWITCH "
Steering angle sensor		"STEERING ANGLE SENSOR "
Yaw rate/side/decel G sensor		"YAW RATE/SIDE/DECEL G SENSOR "
Brake fluid level switch		"BRAKE FLUID LEVEL SWITCH "
Parking brake switch		"PARKING BRAKE SWITCH "
VDC OFF switch		"VDC OFF SWITCH "
ECM		Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication. Accelerator pedal position signal Engine speed signal Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication. Target throttle position signal
TCM		Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication. Shift position signal Current gear position signal
ABS warning lamp		"VDC/TCS/ABS: SYSTEM DESCRIPTION "
Brake warning lamp
VDC OFF indicator lamp
SLIP indicator lamp