WITHOUT INTELLIGENT KEY: Component Function Check
- CHECK FUNCTION
- Select "DOOR LOCK" of BCM using CONSULT.
- Select "DOOR SW-DR", "DOOR SW-AS", "DOOR SW-RL", "DOOR SW-RR", in Data Monitor mode.
- Check that the function operates normally according to the following conditions.
Monitor item Condition Status DOOR SW-DR Driver side door Open On Closed Off DOOR SW-AS Passenger side door Open On Closed Off DOOR SW-RL Rear door LH Open On Closed Off DOOR SW-RR Rear door RH Open On Closed Off Is the inspection result normal?
YES: Door switch is OK.
NO: Refer to "DIAGNOSIS PROCEDURE ".