DTC Confirmation Procedure

CHECK SELF-DIAG RESULT
With CONSULT
1. Turn ignition switch ON.
2. Perform "Self Diagnostic Result" of "AIR BAG" using CONSULT.
Without CONSULT
1. Turn ignition switch ON.
2. Check the air bag warning lamp status. Refer to "ON BOARD DIAGNOSIS FUNCTION ".
  NOTE: SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.
  
  Is malfunctioning part detected?
  
  YES: Refer to "DIAGNOSIS PROCEDURE ".
  
  NO-1: To check malfunction symptom before repair: Refer to "INTERMITTENT INCIDENT ".
  
  NO-2: Confirmation after repair: Inspection End.